Beyblade X Tuning Guide

Beyblade X is Takara Tomy's fourth-generation Beyblade line, launched in Japan on 15 July 2023 and brought to Western markets by Hasbro in summer 2024. Every "Basic Line" top in the system is built from three separate parts that snap together without tools, and almost all real tuning happens by swapping those parts between combos rather than by adjusting any single top as a whole.

The three-part stack

A Beyblade X combo is a Blade, a Ratchet, and a Bit, assembled in that order. The Blade is the top piece and does most of the contact work in a battle — it is the main attack surface and the part most players identify a combo by. The Ratchet is the middle piece: it sets the stack's overall height, shifts the centre of gravity, and determines where on the Blade an opponent's hits land. The Bit is the bottom tip that actually touches the stadium floor, and it is the single biggest factor in how the combo moves — whether it drives forward (Dash), holds its line, or resists being knocked out. Assembly is meant to be tool-free: the Ratchet twists onto the Blade until it clicks with no wobble, then the Bit presses into the Ratchet by hand. If a built combo wobbles, or the Bit spins loosely or falls out under light pressure, the parts are not seated correctly.

Reading the part codes

Retail combos are named by stringing the three parts together, e.g. Dran Sword 3-60F, the BX-01 starter set, or Wizard Rod 5-70DB, the UX-03 booster. The Blade name comes first, followed by the Ratchet code (the numbers, which give the protrusion count and the stack height) and the Bit code (the letters, which identify the tip's shape and how it performs on the floor). Community references such as BBX Arena, Bey Kingdom, and beybxdb.com catalogue these codes and are a faster way to identify a specific part than trying to describe it by shape alone.

Swapping parts to tune behaviour

Because the Blade contributes most of a combo's identity, players generally treat the Ratchet and Bit as the two levers for pushing a given Blade toward Attack, Defense, Stamina, or Balance play. A taller Ratchet changes where contact happens on the stadium; a different Bit changes movement, spin retention, and burst resistance. Changing one part at a time and comparing results is the practical way most players work out what a specific Blade needs. We have not been able to confirm an official Takara Tomy tuning manual or published engineering tolerances for the twist-lock joint — what's above reflects how the parts are documented and discussed by retailers and the community, not a manufacturer specification. If a rule at your event hinges on an exact detail, confirm it with the organiser beforehand.

Putting this into practice across a full three-bey build is easier with the first deck guide for the overall shape and the Bits guide for tip-by-tip choices.

Frequently asked questions

What are the three parts of a Beyblade X top?

A Beyblade X combo is a Blade, a Ratchet and a Bit, assembled in that order. The Blade is the main contact and attack surface, the Ratchet sets the stack's height and centre of gravity, and the Bit is the tip that touches the stadium floor.

What do the numbers in a name like Dran Sword 3-60F mean?

The Blade name comes first, followed by the Ratchet code, whose numbers give the protrusion count and the stack height. The Bit code is the letters, which identify the tip's shape and how it performs on the stadium floor.

Do you need tools to put a Beyblade X combo together?

No. The Ratchet twists onto the Blade until it clicks with no wobble, and the Bit presses into the Ratchet by hand. If the built combo wobbles or the Bit spins loosely or falls out under light pressure, the parts are not seated correctly.

Which parts should I swap to tune a combo?

Because the Blade contributes most of a combo's identity, players generally treat the Ratchet and Bit as the two tuning levers, pushing a given Blade toward Attack, Defense, Stamina or Balance play. Changing one part at a time and comparing results is the practical way to work out what a specific Blade needs.